The last few days I have been researching how to drill and countersink the rudder trailing edge.\u00a0 By hand measuring the AEX aluminum strip I determined the acute angle to be about 10-to-12 degrees.\u00a0 If the common drilled hole through both sides is perpendicular to the chord, this means the countersinking bit will be about 6 degrees off the drilled line when removing material to accept the skin dimples. This angular difference does not seem like much, but we shall see how it goes.<\/p>\n
I have also spent quite some time finalizing the bonding strap and static wick configurations.\u00a0 Using #10 screws, nut plates, and a 3\/8″ braided copper mesh should do the trick for effective electrical connectivity.\u00a0 My intention is utilize the open area near the middle hinge for the bonding strap.\u00a0 Parts were ordered and have arrived from Aircraft Spruce.<\/p>\n
MISC LOGISTICS – continue to acquire painting supplies and work on the configuration of the shed for alodine\/prime processes.\u00a0 I have my eye on a 7.2CFM, 2HP air compressor, but need our finances to stabilize a bit before pulling the trigger.<\/p>\n","protected":false},"excerpt":{"rendered":"
The last few days I have been researching how to drill and countersink the rudder trailing edge.\u00a0 By hand measuring the AEX aluminum strip I determined the acute angle to be about 10-to-12 degrees.\u00a0 If the common drilled hole through both sides is perpendicular to the chord, this means the countersinking bit will be about …<\/span> Continue Reading →<\/span><\/a><\/span><\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[21],"tags":[5,22],"class_list":["post-486","post","type-post","status-publish","format-standard","hentry","category-section-7-rudder","tag-rv10","tag-section-7"],"_links":{"self":[{"href":"https:\/\/rv10.mirimar.org\/index.php?rest_route=\/wp\/v2\/posts\/486","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/rv10.mirimar.org\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/rv10.mirimar.org\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/rv10.mirimar.org\/index.php?rest_route=\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/rv10.mirimar.org\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=486"}],"version-history":[{"count":1,"href":"https:\/\/rv10.mirimar.org\/index.php?rest_route=\/wp\/v2\/posts\/486\/revisions"}],"predecessor-version":[{"id":487,"href":"https:\/\/rv10.mirimar.org\/index.php?rest_route=\/wp\/v2\/posts\/486\/revisions\/487"}],"wp:attachment":[{"href":"https:\/\/rv10.mirimar.org\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=486"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/rv10.mirimar.org\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=486"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/rv10.mirimar.org\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=486"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}